Brother MFC4550 PLUS - Manual (Page 23)

Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
3. COVERPG
ON/OFF
If you set COVERPAGE to ON, you can
send your documents with a Cover Page
generated by your MFC. When the
COVERPAGE setting is ON, you can
select a Cover Page comment.
ON/OFF
OFF 53-54
4. ERROR RE-TX
If you set ERROR RE-TRANSMISSION
to ON, the MFC automatically resends
the page once an error occurs.
ON/OFF
OFF 59
5. и&ЕЙ
OPTIONS
5. REDUCTION
You can avoid having your incoming data
separated by printing a reduced copy of
the incoming document. The reduction
methods are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
AUTO 67 68
6. ROD PAPER
You can select one of three sizes of paper.
The MFC automatically will adjust the
size of the incoming fax document or
original document so that it fits the paper
size you have selected.
LETTER/LEGAL/A4
LETTER 66
7. TONER SAVE
You can extend the hfe of the toner by
conserving its use.
ON/OFF
OFF 70
8. SLEEP MODE
This mode reduces the power consumption
when the MFC is idle. The time period
before the MFC drops into the mode is
user selectable.
OOMIN 17
9. PRINT
DENSITY
You can adjust Print Density with this
function.
69
1. TONE/PULSE
There are two different dial types and
you must select the type of signal suitable
for your telephone line.
TONE/PULSE
TONE 19
6 . TEL
OPTIONS 2. RING DEUY
This is the number of rings before the
MFC answers the call when in F/T or Fax
Mode.
0/1/2/3/4 rings
2 62-63
3. SPEAKER
VOLUME
You can adjust the speaker volume with
this function.
OFF/LOW/HIGH
LOW 71
11