Kenmore 385.16231 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(3) Mark for placement of buttonhole
@ Starting point
(D Slider
(D There should be no gap-,
0 Spring holder
d) Difference
[
3
] Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
into the fabric to the starting point.
Then lower the automatic buttonhole foot.
Depress the loot control to sew a buttonhole. The
machine will stop when the buttonhole is completed.
[
4
] Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks Cut the
opening with the buttonhole opener.
[
5
]To sew another buttonhole, you must reset the machine.
Reset by shitting the stitch selector in either direction,
(|)or@, to the next setting. Then shift the selector back
to the buttonhole setting “[]
[U When finished, push the buttonhole lever up as far as it
will go.