Using walking foot (option), Using 1/4"seam foot (option) – Kenmore 385.16231 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Walking Foot (Option)
(T) Thumb screw
(D
Foot holder
Clever
® Needle clamp
d) Presser bar
This is a special attachment for hardTo-feed materials.
This foot prevents fabric slipping or puckering by feeding
fabrics with both upper and lower feed dogs The walking
foot is great for line fabrics, knits, leather and matching
siaids.
TjTurn off the switch
^ Raise the needle and presser foot,
^Loosen the thumbscrew and remove the foot holder
{Refer to page 12)
[4] Attach walking foot to the presser bar with the lever
above the needle clamp, and secure it with the thumb
screw.
Sew at low to medium speed.
Set the stitch length in the range of 0-4
Using 1/4"Seam Foot (Option)
Ф Stitch selector:
7
(?) Stitch width:
6,5
Ф Stitch length:
Red гопе
@ Needle thread tension:
3 t o 5
(5) Presser foot:
1 /4” seam foot
NOTES:
When using the 1/4" seam foot, make sure to use the
center needle position, otherwise the needle may strike
the presser foot and possibly break.
Use a #11 blue stretch needle, which effectively prevents
skipped stitching.
Using the black bar as a guide, straight stitch fabric pieces
together. Use for keeping layers of fabric feeding evenly.
This foot is a must for sewing lightweight fabrics, matching
plaids, stripes and quilting,