Important safety instructions, Danger, Warning – Kenmore 385.16231 User Manual
Page 2: Save these instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the following:
Read all instructions before using this appliance
DANGER
-To reduce the risk of electric shock;
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning,
2. Always unplug before replacing a sewing machine bulb Replace bulb with same type rated 5 Watts
WARNING
- To reduce the risk of burns, fire, electric shock or injury to persons:
1, Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.
2. Use this appliance only for its intended use as described in this owner’s manual
Use only attachments recommended by the manufacturer as contained in this owner's manual.
3 Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water.
Return this sewing machine to the nearest Sears store or service center for examination, repair, electrical or mechanical
adjustment,
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot
controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7 Do not operate where aerosol (spray) products are being used or where oxygen is being administered
8 To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10- Keep fingers away from all moving parts. Special care is required around the sewing machine needle .
11. Always use the proper needle plate. The wrong plate can cause the needle to break,
12. Do not use bent needles.
13. Do not pull or push fabric white stitching. It may deflect the needle causing it to break..
14. Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as threading the needle,
changing the needle, threading the bobbin, changing the presser foot, and the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, iubrlcaling, or when making any
other adjustments mentioned in this owner's manual.
SAVE THESE INSTRUCTIONS
Designs and specifications are subject to change without prior notice.