Kenmore 385.16231 - Manual (Page 28)

Presser Foot Types (continued)
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
For: Darning
Satin stitch
Monograming
Applique
Shell stitch
Decorative stitch patterns
Twin needle stitches
Smocking
(page 50)
(page 52)
(page 54)
(page 54)
(page 64)
(page 68)
(page 70)
(page 74)
Overedge foot (Foot C)
This foot is spectaliy constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
For; Overcasting (Page 58)
Overedge stitch (Page 68)
Serging (Page 76)
Herring bone stretch (Page 78)
’ Buttonhole foot (B) (Option)
Use this foot for manual buttonholing.
It is marked to help you measure your buttonholes
accurately
For: Manual buttonhole (page 88)
' Quilter
The quilter helps keep the stitching lines straight.
For: Quilting (page 42)
1/4 "Seam foot (Option)
This foot is useful for patchwork quilt The guide on the
foot maintains an exact 1/4" (0.7 cm) seam allowance,
For: Using 1/4" seam fool (page 44)
- Walking foot (Option)
This is special attachment for hard-to-feed materials. This
fool effectively prevents fabrics from shifting and
puckering- It is great for quilting and matching plaids.
For: Using walking foot (page 44)
Quilter:
Acolchador:
Guide à matelasser:
1/4" seam fooí:
Prénsatelas de puntada recta
con 1/4" guía:
Piqueuse 1/4 Po:
16