Pressure adjusting lever, Prsss©r l“oot lift©r, Thread cutter – Kenmore 385.16231 User Manual

Page 22: Extension table

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Pressure Adjusting Lever

The pressure adjusting lever should be set at "3'’ for regular
sewing.

Reduce the pressure to “2” for applique, cut work, draw
work and basting
Set the pressure at “1" when sewing chifion, lace, organdy
and other fine fabrics. Velour and knits with a lot of stretch
may also require the pressure at “1"

Prsss©r l“Oot Lift©r

The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4“ (0.6 cm) higher than the norma!

up position for easy removal of the presser foot, or to help
you place heavy fabric under the foot.

Thread Cutter

©Thread cutter

You do not need a pair of scissors to cut the thread after
sewing. Simply use the built-in thread cutter.

Extension Table

* Detaching the table

Pull the table away from the machine, as illustrated, for

iree-arm“ sewing of cuffs and sleeves,

* Attaching the table

Push the extension table until it snaps into the machine,

* Accessory box

Open the cover of the accessory box toward you. The
sewing accessories are conveniently located in the box.