Monogramming, Applique, Width – Kenmore 385.16231 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Monogramming

(T) stitch selector:

Stitch

width:

(D Stitch length:
0 Needle thread tension:
(5) Presser foot F:
(D Pressure adjusting lever:

5
3
0.5 to 1
1 to 4
Satin stitch foot
1 or 2

Applique

© stitch selector:
@ Stitch width;
@ Stitch length:
0 Needle thread tension;
® Presser foot F:
© Pressure adiusling lever:

Baste appligue pieces on the fabric^ or fuse the appligue
pieces With an Iron-on fabric Joiner, Stitch around the
applique, making sure the needle fails along the raw edge
of the applique.

Attach a piece of stabilizer on the wrong side {Bottom side)
of the fabric.

Draw letters on the fabric with tailor’s chaik. Form each

pattern with a satin stitch, adjusting the stitch width.

6.5

Goid stretch stitch position

2 to 6
Satin stitch foot
2

NOTE:
Maximum stitch width for pattern #9 is 1 4" (3.5 mm)

when setting the stitch width controi at 6.5.

“0