Panasonic NVS7EG - Manual (Page 96)

ENGLISH
Copying (Dubbing)
Connections
1
ILLUSTFWION
1 Open the Socket Cover.
2 Connect the Movie Camera to a VTR.
Using ithe Supplied AV Output Cable;
Movie Camera
Video Output Socket O _
Audio Output Socket (L) @ -
Audio Output Socket (R) ©
Using the Supplied S-Video Gable
Video Tape Recorder
AV Input Socket©
I Movie Camera I
S-Video
Output Socket O
Audio Output ;
Socket (L) 0
Audio Output :,
Socket (R) ,©
I Video Tape Recorder |
S-Video
Input Socket ©
Audio Input
Socket (L) ©!
Audio Input
Socket (R) ©
Operations
I Movie Camera I
1. Insert a recorded videOjeSsSstte ;
into the Movie Camera.
2. Press the [PLAY] ButtoriTtand if
necessary the [f^FFIor tiBEW/;
(3I Button to locate the scene
from where the dubbing is to
start). I ,
(
3. ' Press the [PALISEl Button at
the point where the dubbirif:is : ^
to start.
6. Press1he [F>AUSE] Button to, ,
start the playback.
8. Locate On the Movie Camera
the beginning of the nextspene
i to be nubhect. ano nros.s the
[PAUSE] Button atthat poirjt:; J
I Video Tape Recorder (VTR) |
k .
Insert a video cassette with
intact erasure prevention tab
into
the VTR.
If your VTR is equipped with SP
and LP modes, it is
recommended to use the SP
mode. ;;; /--i;'i r;'':;; - r
5 . Press the Record Button to start
recording.
7. iPreSS thë Paùsé/Still Buttôn at
the exact position where the
recording is to end.
•The VTR is now in the
recording pause mode.
9. Press thë Pause/Still Button
again to resume reco.'ding.
• Repeat the operation steps 6 to 9 for each additional scene to be
dubbed.
1 New Edit Socket
By connecting an Editing Controller (optional) to this socket as well
as to a VTR equipped with Edit Socket, highly precise and speedy
editing becomes possible.
n--1
b
-96-