Using the on-screen display function, How to turn off the indications in the viewfinder, 1 press twice – Panasonic NVS7EG User Manual
Page 40: To return to the initial mode, Index signais (viss), How to use the index signals
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENGLISH
ILLUSTRATION
Using the On-Screen Display
Function
■ How to Turn off the Indications in the Viewfinder
1
Press twice.
•The indications in the Viewfinder disappear 0 except the
\A/arning and Alarm Indications, the Date/Time Indication
and the Manual While Balance Indications.
■ To Return to the Initial Mode...
Press the [OSD/M] Button again.
•At every press of the [OSD/M] Biiitton, the Tape Counter
Indication chahges in the following order: 0-0 0^0
Index Signais (VISS)
■ How to Use the Index Signals
The index signals make possible the use of the VHS Index Search
or the Intro Scan Function When playingibaek the tape oh a VTR
equipped with these functions.
An index signal is recorded automatically in the following
cases;
•When shooting is started for the4irst time after attaching the
Battery Pack.
•When shooting is restarted after exchanging the cassette,
•When shootingiis.started by sliding the [OPERATE] Switch to
“CAMERA” after sliding it,to “VTR”.
In each of these cases, the “INDEX” Indication © in the
Viewfinder flashes for a few-seconds.
• For the correct functioning of the VHS Index Search and Intro
Scan Functions on the VTR, the index signals should be spaced
at least 2 minutes in the SP mode and 5 minutes in the LP mode.
(u 00 0()>^
o
4-
'’(
m
0 Of) nn)-^
-0
c >
■■
>
imm
'
■
■1
'
: INDEX-?--- O
-40-