KEYENCE LJ-V7000 Series - Manual (Page 58)

58 LJ-V7000_COM_RM_E
9.2.9.12 Profile storage data storage order and specific example
Stored profile data, measurement values and internal measurement values (*1) can be acquired
using GetStorageProfile. The acquired data has the following structure when there is 1 byte per
row.
*1 "Internal measurement values" refers to measurements taken immediately before the OUT
settings measuring mode processing. Each OUT internal measurement value is saved
individually for each piece of profile data.
The structure of 1 piece of profile storage data
* The tolerance judgment result of internal measurement values is always 0.
0
1
2
3
4 Measurement results (OUT1) Measurement value information BYTE
5 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
6 reserve BYTE
7 reserve BYTE
8 Measurement value
9
10
11
䌾
124 Measurement results (OUT16) Measurement value information BYTE
125 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
126 reserve BYTE
127 reserve BYTE
128 Measurement value
129
130
131
132 Profile data Header 䇭LJV7IF_PROFILE_HEADER
133
䌾
154
155
156 When 800 profiles
䌾
3355
3356 Footer LJV7IF_PROFILE_FOOTER
3357
3358
3359
3360 Measurement results (OUT1) Measurement value information BYTE
3361 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
3362 reserve BYTE
3363 reserve BYTE
3364 Measurement value
3365
3366
3367
䌾
3480 Measurement results (OUT16) Measurement value information BYTE
3481 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
3482 reserve BYTE
3483 reserve BYTE
3484 Measurement value
3485
3486
3487
FLOAT
FLOAT
FLOAT
FLOAT
DWORD Time accumulated
䌾
䌾
* Refer to "Profile data amount calculation method" for the number of profiles.
The number changes according to the settings. Unsigned 32 bit data
Measurement value
(Example: When the
measuring mode is
peak hold, the held
value is the output
measurement value)
Internal
measurement value
(Example:
Measurements for
the profile.
Measurements taken
immediately before
measuring mode
processing)