KEYENCE LJ-V7000 Series - Manual (Page 26)

26 LJ-V7000_COM_RM_E
9.1.5 Functions related to modifying or reading settings
Processing for these functions fails when the controller is in the system error state.
9.1.6 Acquiring measurement results
Processing for these functions fails when the controller is in the system error state.
Function name Overview
LJV7IF_SetSetting Sends a setting to the controller
LJV7IF_GetSetting Gets a setting from the controller
LJV7IF_InitializeSetting Initializes a controller setting
LJV7IF_ReflectSetting
Reflects the contents of the write settings area in
the running settings area and the save area
LJV7IF_RewriteTemporarySetting
Overwrites the contents of the write settings area
with the settings in the running settings area and
the save area
LJV7IF_CheckMemoryAccess
Checks whether or not settings are being saved to
the save area
LJV7IF_SetTime Sets the date/time for the controller
LJV7IF_GetTime Gets the date/time for the controller
LJV7IF_ChangeActiveProgram Changes the active program number
LJV7IF_GetActiveProgram Gets the active program number
Function name Overview
LJV7IF_GetMeasurementValue Gets measurement values
LJV7IF_GetProfile
Gets profiles when the operation mode is "high-
speed (profile only)"
LJV7IF_GetBatchProfile
Gets profiles when the operation mode is "high-
speed (profile only)"
* Use LJV7IF_GetProfile when Compression (time
axis) is on.
LJV7IF_GetProfileAdvance
Gets profiles when the operation mode is
"advanced (with OUT measurement)"
LJV7IF_GetBatchProfileAdvance
Gets profiles when the operation mode is
"advanced (with OUT measurement)"
* Use LJV7IF_GetProfileAdvance when
Compression (time axis) is on.