KEYENCE LJ-V7000 Series - Manual (Page 25)

25 LJ-V7000_COM_RM_E
9 Functions
9.1 Function list
9.1.1 Operations for the DLL
These functions are processed normally even when the controller is in the system error state.
9.1.2 Establish/disconnect the communication path with the controller
These functions are processed normally even when the controller is in the system error state.
9.1.3 System control
Excluding LJV7IF_RetrunToFactorySetting, these functions are processed normally even when the controller
is in the system error state. LJV7IF_RetrunToFactorySetting may fail in the system error state (when a head is
not connected, etc.).
9.1.4 Measurement control
Processing for these functions fails when the controller is in the system error state.
Function name Overview
LJV7IF_Initialize Initializes the DLL
LJV7IF_Finalize Performs the termination processing for the DLL
LJV7IF_GetVersion Gets the DLL version
Function name Overview
LJV7IF_UsbOpen Establishes a USB connection
LJV7IF_EthernetOpen Establishes an Ethernet connection
LJV7IF_CommClose
Disconnects the connection (both USB and
Ethernet)
Function name Overview
LJV7IF_RebootController Reboots the controller
LJV7IF_RetrunToFactorySetting Returns the controller to the factory settings
LJV7IF_GetError Gets the controller system error information
LJV7IF_ClearError Clears the controller system error
Function name Overview
LJV7IF_Trigger Issues a trigger
LJV7IF_StartMeasure Starts measurements
LJV7IF_StopMeasure Stops measurements
LJV7IF_AutoZero Issues auto zero
LJV7IF_Timing Issues timing
LJV7IF_Reset Issues a reset
LJV7IF_ClearMemory Clears the internal memory