KEYENCE EX-V Series - Manual (Page 81)

Chapter 4 Use of Data Processing Functions
4
71
When "[-0" is selected:
5. Press the key.
The sensor saves the setting and returns to the measurement state.
When "C-1" or "C-2" is selected:
5. Press the key to specify each function.
[- ■■ 0: Trigger level setting
[- ■■ 1: Trigger hysteresis setting
[- ■■ 2: Sampling delay setting
[- ■■ 3: Sampling period setting
6. Press the key to specify functions " ■■ 0" to " ■■ 3".
7. Press the key to specify each function.
• Specify the trigger level and trigger hysteresis based on the displayed value.
• Specify the sampling delay and sampling period as time length (ms).