KEYENCE EX-V Series User Manual

Page 42

Chapter 3 Use of Common Functions

Reference 1: When the initial setting for a function is changed, the setting is
displayed in red.

Reference 2: To return to the common function selection mode without changing
the setting, press the

key.

Note 1: When you return to the measurement state by pressing the

key even

after entering a function number or numeric value, the number or value is not
saved.

Note 2: The output is disabled for the time between entering the common function
selection mode with the

key and returning to the measurement state after

setting. However, if the output is already on before the sensor enters the common
function selection mode, the output is retained.