Enabling/disabling traps on the device – Cisco 12000/10700 V3.1.1 User Manual
Page 537
17-3
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 17 MPLS Trap Management
Enabling/Disabling Traps on the Device
Enabling/Disabling Traps on the Device
To enable or disable MPLS trap generation on a selected chassis, proceed as follows:
Step 1
Open the MPLS Trap Configuration window. Right click on an appropriate object and select the Cisco
12000/10720 Manager> Configuration> Chassis> MPLS> MPLS Trap Configuration option. See
for information on which objects allow you to launch the MPLS Trap Configuration window.
The MPLS Trap Configuration window appears, with the Traps tab displayed.
Figure 17-1 MPLS Trap Configuration Window—Traps Tab
Table 17-2
Launching the MPLS Trap Configuration Window
Cisco 12000/10720 Router
Manager Window/Task
Objects (that can be selected) to Open the Window
Menu Options to Select to Open Window
Site
Chassis
Module
Interface
VRF
12000
Series
10720
Enabling/Disabling
Traps on the Device
Yes
Yes
Yes
No
No
No
Cisco 12000/10720 Manager>
Configuration> Chassis> MPLS> MPLS
Trap Configuration