Cisco 12000/10700 V3.1.1 - Manual (Page 203)

C H A P T E R
8-1
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
8
Interface Configuration
This chapter describes how to configure or set up the interfaces associated with each line card. You can
configure or set up any interface through the Interface Configuration windows associated with each line
card.
This chapter contains the following information:
• Interfaces and Related Technology-Specific Windows
• Launching the Interface Configuration Windows
• Generic Interface Configuration
• ATM Interface Configuration
• Ethernet Interface Configuration
• IP Configuration
• POS Interface Configuration
• APS Interface Configuration
• SRP Interface Configuration
• SRP Interface Side Configuration
Interfaces and Related Technology-Specific Windows
Interfaces on line cards can support multiple technologies. Configuration windows are
technology-specific. For example, a POS interface supports three configurable technologies: Generic,
POS, and IP. Therefore, if you want to view or modify the configuration of a POS interface, you might
need to view three windows:
• Generic Interface Configuration window
• POS Interface Configuration window
• IP Interface Configuration window
This same process is applicable to all different types of interfaces. Table 8-1 outlines which
technology-specific configuration windows apply to each interface type.