Lc status, Ip routing status, Viewing the ip routing status window – Cisco 12000/10700 V3.1.1 User Manual
Page 156
4-42
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
IP Routing Status
LC Status
This area displays the status of all the Line cards for the selected chassis. It displays a table that lists the
potential slot numbers and the corresponding supported redundancy mode.
Note
The slots identified by the slot numbers in the table, may not contain an RP or CSC or SFC.
Slot No—Displays the slot number of the available modules of the chassis.
RPR Mode—Displays the redundancy mode of the slot identified by the slot number.
IP Routing Status
IP routing is the process of moving packets from one network to another and delivering the packets to
the hosts. Classless Inter-domain Routing (CIDR) is a method supported by classless routing protocols
such as OSPF and BGP4. This is based on the concept of ignoring the IP class of the address permitting
route aggregation and VLSM that enables the routers to combine the routes in order to minimize the
routing information that needs to be conveyed by the primary routers. It allows a group of IP networks
to appear to other networks as a unified and larger entity.
The IP Routing Status dialog displays the number of CIDR routes and details of the routes configured
for the selected chassis. The user can use this information available in the IP Routing Status dialog to
view and debug problems related to network CIDR routes.
An IP routing entry in the device can be configured using the following command sequence:
Router Prompt > configure terminal
ip route
The IP routing entries can be viewed using the command:
Router Prompt > show ip route
The Cisco 12000/10720 Router Manager uses the IP-FORWARD-MIB to populate the IP Routing Status
dialog fields.
The IP Routing Status section covers the following areas:
•
Viewing the IP Routing Status window
•
IP Routing Status Window—Detailed Description
Viewing the IP Routing Status window
To view the Ip Routing Status window for a chassis, proceed as follows:
Step 1
Right click on the chassis object and select the Cisco 12000/10720 Manager>Fault>IP Routing Status
option. See
for information on which objects allow you to launch the IP Routing
Status window.