Cisco 12000/10700 V3.1.1 - Manual (Page 571)

20-9
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 20 Performance Management and Historical Data
Viewing the Performance Manager Window
• LogicalOR—displays either 1 or 0. This is typically used for status flags. Some attributes may have
only two potential values (such as, true or false; yes or no; 1 or 0). When summaries are generated
from values such as these, and the logicalOR rule is used, the summarized value is 1 if any value in
the summary interval is 1. If all values in the summary interval are 0, then the summarized value is 0.
Note The Rule option is not available when the option to view raw data is chosen.
Refresh
Refresh—The Refresh button is blue when it is available. It is grayed out when not available. The
Refresh button is available for selection when Now is selected, or when any criteria has changed and
you have moved the cursor away from the changed value by pressing the Tab key or by using the mouse.
Line Chart Tab
The Line Chart tab displays the retrieved data in a graphical format. The X-axis displays the time at
which the polling was done, and the Y-axis displays the value retrieved or the value when the equipment
did not respond properly.
Further information regarding the element, units, and missed polls is provided, using the appropriate
color coding displayed at the top of the chart. Blue represents the values retrieved and red identifies any
polled values missed.
Table Display Tab
The Table tab displays the data retrieved in a tabular format. The first column shows the time of polling,
and the second column shows the retrieved values. Blue represents the values retrieved and red identifies
any polled values missed.