Cisco 12000/10700 V3.1.1 - Manual (Page 424)

14-34
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Address Family Configuration
Figure 14-22 BGP Address Family—Network Configuration Window
Step 4 Choose the chassis from the Chassis list and the address family from the Address Family List, for which
you want to configure the Network path.
Step 5 Edit the fields displayed in the window, as required.
BGP Address Family-Network Configuration—Detailed Description
The Configure Network window displays a list of Address Families and an area: Add/Remove Network.
Address Family—Displays a list of the address families.
Add/Remove Network
Address Family—Unique identifier of the address family type.
VRF Name—Identifier of the VRF Name if the address family type is IPv4 VRF
Network Number—This is used to configure the IP address of a network to be advertised through BGP.
Network Mask—This is used to configure the subnet mask of the network to be advertised
Note You cannot configure a network for vpnv4 address families.