Cisco 12000/10700 V3.1.1 - Manual (Page 177)

5-13
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 5 Managing Modules
Module Inventory
Step 2 Choose a Chassis and Module from the list boxes at the left of the window. The inventory information
for the selected module appears.
Note The Module Inventory window is read-only.
Module Inventory Window—Detailed Description
The Module Inventory window has two tabs: General and Asset Tracking. Only the General tab is
applicable to Cisco 12000/10720 Router Manager. The Asset Tracking tab is not applicable to Cisco
12000/10720 Router Manager.
General
The General tab (see Figure 5-5 on page 5-10 ) has four areas:
Module Details
The Module Details area contains the following fields:
Serial Number—Displays the serial number of the selected module. This number is zero if data is
unavailable.
Description—Displays a description of the selected module.
Type—Displays the type of the selected module.
System Details
The System Details area contains the following fields:
Host Name—Displays the host name of the system which contains the selected module.
Boot Image Host—Displays the IP address of the host, which supplies the software currently running.
Description—Displays the hardware type, software operating system, and networking software of the
system that contains the selected module.
ROM ID—Displays the system boot strap description and version identifier.
Domain Name—Displays the domain portion of the domain name for the system which contains the
selected module.
Services—Displays all the services available on the system.
Version Details
The Version Details area contains the following fields:
IOS—Displays the IOS operating software version being used by the selected module.
Hardware—Displays the version of the selected module.
Firmware—Not applicable to Cisco 12000/10720 Router Manager.
Software—Displays the software version installed in the card. No information appears if data is not
available.