Device_is_master (default policy) – Cisco 12000/10700 V3.1.1 User Manual
Page 329
12-5
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 12 Managing ATM Connections
ATM Connection Synchronization
•
Data has been provisioned onto the device via Cisco 12000/10720 Router Manager but a Write Mem
has not been performed. The device then reboots. The newly provisioned data is modeled in Cisco
12000/10720 Router Manager but not on the device.
•
Auto synchronization is initiated automatically every 30 minutes on the device.
The policies that are available for ATM connection synchronization are described in the
.
Device_is_Master (default policy)
The Device_is_Master policy creates new PVC connection objects in the EM, for the connections
available on the device. In case connection object that is available in the EM is removed from the device,
then the Device_is_Master policy moves the connection object into the decommissioned state during the
next synchronization. If the same object with the same configuration details is again added to the device,
the Device_is_Master policy identifies the object and moves it to the normal state. However if a new
connection object is added to the device with different configuration details, then the Device_is_Master
policy creates the connection object in the EM and moves it to the normal state. The ATM Connection
synchronization never deletes any ATM connection object.
Syntax for Set:
cd
./objectUtilsTestRig setIntValue "ComponentManaged:
ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 0
For policy information, see
./objectUtilsTestRig setIntValue "ComponentManaged:
ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 1
For policy information, see
./objectUtilsTestRig setIntValue "ComponentManaged:
ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections 2
For policy information, see
Syntax for Get:
./objectUtilsTestRig getAttrValue "ComponentManaged:
ciscoPlatformCon:CiscoChassis-MIB.DeleteConnections
Table 12-2 ATM Connection Synchronization Policies
Policy Name
Value
Normal 0
Device_is_Master (default policy)
1
CEMF_is_Master_After_First_Sync
2
Table 12-3 DeviceIsMaster Policy
VCL in Cisco EMF
VCL State
VCL on Device
Behavior
Present
Normal
Not Present
Remove from
Cisco EMF