Ip extended tab – Cisco 12000/10700 V3.1.1 User Manual
Page 302
11-16
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
Access List Configuration
IP Extended Tab
The IP Extended tab displays a single IP Extended area. The IP Extended area is further split into three
sub-areas: Dynamic List, Source, and Destination.
Figure 11-6 Access List Configuration Window—IP Extended Tab
IP Extended
The IP Extended area contains two fields:
Access Action—Action to be taken if the conditions are matched. Possible actions are deny and permit.
Protocol Name—Name or number of an IP protocol. Valid protocol number values are 0 to 255. Valid
protocol names are as follows:
Table 11-2
Valid Protocol Names
Valid Protocol Names
ahp
ipinip
eigrp
nos
gre
ospf
icmp
pcp
igmp
pim
igrp
tcp
ip
udp
esp