Cisco 12000/10700 V3.1.1 - Manual (Page 419)

14-29
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Address Family Configuration
Figure 14-19 Configure Address Family Window
Step 4 Choose the chassis from the Chassis list for which you want to configure the BGP address family.
Step 5 Edit the fields displayed in the window, as required.
Configure Address Family—Detailed Description
The Configure Address Family window displays a single area: Add/Remove Address Family.
Add Address Family
Address Family—Unique identifier of the address family type. The available options are: ipv4 unicast,
ipv4 multicast and vpnv4 unicast.
Note In Cisco 12000/10720 Router Manager Release 3.1, the ipv4 vrf address family type is not configurable
through the EM.
Neighbor IP Address—Specifies the IP address of the neighbor router for the address family
Remote AS—Specifies the neighbor router’s autonomous system number. This value can range from 1
to 65535.