Udp status, Viewing the udp status window – Cisco 12000/10700 V3.1.1 User Manual
Page 162
4-48
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
UDP Status
UDP Status
UDP is a connectionless, unacknowledged, and unreliable protocol that is defined at the Transport layer
of the OSI reference model. Although UDP is responsible for transmitting messages, no software
checking for segment delivery is provided at this layer. UDP depends on upper-layer protocols for
verification.
The UDP Status dialog provides general details of all UDP connections established on the device. The
dialog is also updated whenever a new UDP connection is established on the device. The network
engineer can view the existing UDP connection and use the information to debug the problems in the
network.
The UDP connections can be viewed using the following commands:
•
show ip traffic
•
show ip sockets
The Cisco 12000/10720 Router Manager uses the UDP-MIB to populate the UDP Status dialog fields.
The UDP Status section covers the following areas:
•
•
UDP Status Window—Detailed Description
Viewing the UDP Status Window
To view the UDP Status window for a chassis, proceed as follows:
Step 1
Right click on the chassis object and select the Cisco 12000/10720 Manager>Fault>UDP Status
option. See
for information on which objects allow you to launch the UDP Status
window.