Cisco 12000/10700 V3.1.1 - Manual (Page 321)

11-35
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
WRED ToFab Configuration
Step 4 Click Finish, and the ToFab policy is deleted.
Note If deletion fails, another module/line card might be currently using the ToFab policy; therefore,
you cannot delete the object.
WRED ToFab Policy Configuration Window—Detailed Description
The WRED ToFab Policy Configuration window displays a single ToFab Policy Configuration tab.
ToFab Policy Configuration tab
In the WRED ToFab Policy Configuration tab, the left hand side indicates the ToFab policies available
in the device. The right hand side of the tab displays the slot numbers, the available COS-Queue groups
and the combination of the Slot-CosQ group configurations.
Slot Table Parameters
On creation of a ToFab policy, the Slot-CosQ Groups listbox is empty. The user needs to choose the slot
number to which a CosQ group has to be associated. However, different CosQ groups cannot be
associated with the same slot number. The status of the policy indicates the number of modules that are
using the current ToFab Policy.
Slot Number—Displays the destination slot number.
Note The number of slots is limited to 16.
CosQ Groups—The user can choose a CosQ group from this list to associate it to a slot.
Actions
Add—To add a Slot-CosQ group combination, choose a slot from the drop down list box and choose the
CosQ group to be associated for the slot and then click the Add button. This action results in adding an
entry into the ToFab policy in the SlotNumber-COSQueue group name format.
Remove—To remove a Slot-CosQ group combination from the list, choose Remove. This action results
in the removal of the Slot-CosQ group combination from the list.
Create—To create a ToFab policy, click Create, a window pops up asking the user to enter the name for
the ToFab policy.
Slot-CosQ Groups
The Slot-CosQ group listbox lists the combination of the slots and the respective CosQ groups
associated.