Deleting an atm qos profile – Cisco 12000/10700 V3.1.1 User Manual

Page 339

12-15

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 12 Managing ATM Connections

Managing ATM QoS Profiles

To edit an existing ATM QoS Profile, proceed as follows:

Step 1

Right-click on an interface, then choose Cisco 12000/10720 Manager>Configuration>Interface>
QoS> ATM QoS Profile Configuration. See

Table 12-6 on page 12-18

for information on the objects

that allow you to launch the ATM QoS Profiles window.

Step 2

Choose the profile you wish to edit from the list of existing profiles displayed in the list at the left of the
window.

Step 3

Edit the fields displayed in the tabs, as required.

Step 4

Choose Save from the File menu to save the changes made to the profile.

Step 5

Choose Close from the File menu to close the window.

Deleting an ATM QoS Profile

Note

An existing ATM QoS profile can only be deleted if it is not currently applied to any interfaces. Once
you have applied a QoS profile to a connection, you cannot edit or delete it unless you remove it from
the connection. If that QoS profile is being used by any other connections, you will still not be able to
edit or delete the QoS profile. If you want to view the connections that are using a specific profile, run
a Cisco EMF query against the profile name (refer to the Cisco Element Management Framework User
Guide for details). Once you have removed a QoS profile from all connections, you can proceed to edit
the attributes within the QoS Configuration window or delete the selected QoS profile.

To delete an existing ATM QoS profile, follow these steps: