Cisco 12000/10700 V3.1.1 - Manual (Page 172)

5-8
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 5 Managing Modules
Module Fault Management
Figure 5-4 Module Fault Management Window
Step 2 Choose a Chassis and Module from the list boxes at the left of the window. The fault management
information for the selected module appears. For detailed information on the areas within this tab, see
“Module Fault Management Window—Detailed Description” section on page 5-8 .
Module Fault Management Window—Detailed Description
The Module Fault Management window displays a single Fault Management tab. The Fault Management
tab displays two areas: Module Availability and Cisco Contact Details.
Note The details related to the modules are available only if the module is in a managed state.
Module Availability
The Module Availability area contains the following fields:
• Up Time—Displays the time after the network portion of the system was last re-initialized for the
selected module.
• Free Memory—Displays the memory space (in bytes) currently unused by the selected GRP module.
• Last Restart Reason—Displays the reason for the system being re-initiated for the selected GRP
module.