Searching in the configuration editor, Configuration editor window—detailed description, Configuration editor tab – Cisco 12000/10700 V3.1.1 User Manual
Page 151
4-37
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Configuration Editor
Note
If you receive an error message after clicking Upload, you might need to make sure
the tftpboot server is running on the workstation that Cisco 12000/10720 Router
Manager is running on. The tftpboot server must be running before you can upload
the running configuration. Make sure that the IOS username and password are set
correctly in the Management Information.
Searching in the Configuration Editor
To search using the configuration editor, proceed as follows:
Step 1
In the search criteria field, type in the text you wish to search for.
Step 2
Now, click Add. The text you specified appears in the criteria name box under the Selection area.
Step 3
Click Upload. A vi editor window appears, with the running configuration displayed. The first instance
of the specified search criteria is displayed.
Step 4
If you want to delete your text from the criteria name box, simply click on the text you want to delete in
the box, then click Delete.
Note
Before downloading the modified running config, the vi editor launched with the running
configuration of the selected chassis must be closed.
Downloading the Edited Configuration File to a Selected Chassis
After you have edited the running configuration, save the changes and click Download to download the
modified running configuration to the selected chassis. This new configuration is reflected onto the
startup configuration and the running configuration.
Configuration Editor Window—Detailed Description
The Configuration Editor window displays a single Configuration Editor tab.
Configuration Editor Tab
The Configuration Editor tab (see
) displays two areas: Selection and
Operations on Device.
Selection
Criteria Name—Any text strings you have searched for appear in this list.
Search Criteria—Enter search text into the search criteria data entry box. Click Add to move the text
string into the configuration criteria list.