Cisco 12000/10700 V3.1.1 - Manual (Page 489)

15-33
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 15 MPLS Management
Fault Management for MPLS Traffic Engineering
Fault Management for MPLS Traffic Engineering
This section describes Fault Management for MPLS traffic engineering (TE).
MPLS Tunnel Information
The MPLS Tunnel Information window displays the status information about the MPLS tunnels
configured on the managed chassis (Cisco 12000 and 10720 Series Routers). The MPLS Tunnel
Information window uses the MPLS-TE-MIB to populate window. This window can be used to find: the
tunnels that exist on a device, the LSPs that originate or transit this device and whether the MPLS entities
are functionally up or down.
The MPLS Tunnel Information section covers the following:
• Viewing the MPLS Tunnel Information Window
• MPLS Tunnel Information Window—Detailed Description
Viewing the MPLS Tunnel Information Window
To view the MPLS Tunnel Information window, proceed as follows:
Step 1 Right click on an appropriate chassis object and choose Fault> MPLS> MPLS Tunnel Information.
See
Table 15-1 on page 15-3 for information on which objects allow you to launch the MPLS Tunnel
Information window. The MPLS Tunnel Information window appears, with the Select Tunnel tab
displayed.