Ips status window—detailed description, Ips status, Remote node – Cisco 12000/10700 V3.1.1 User Manual

Page 250: Srp topology map, Viewing the srp topology map

9-20

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 9 Interface Status

SRP Topology Map

IPS Status Window—Detailed Description

The IPS Status window displays two areas: IPS Status and Remote Node.

IPS Status

Side Wrap Status—Displays the wrap status of the Sides at the node

IPS Wrap Counter—Displays the number of transitions from unwrap to wrap state

Neighbor MAC Address—Displays the neighbor’s MAC address on the ring

IPS Management Request Mode—Displays the current IPS management mode on the side

IPS Active Mode—Displays the currently active IPS mode for the local node

IPS Auto Detect Mode—Displays the current IPS mode that is automatically detected by the local node

IPS Remote Mode—Displays the IPS mode indicated in the IPS messages that are received from the
other nodes on the ring

IPS Remote Type—Displays the type of the IPS Remote mode

Last Wrap Time—Displays the time (in seconds) for the last wrap

Last Unwrap Time—Displays the time (in seconds) for the last unwrap

Remote Node

Host Name—Displays the name of the remote host

IP Address—Displays the IP address of the remote host

Interface—Displays the Interface at the remote host

Connecting Side—Displays the connecting Side at the remote node

SRP Topology Map

The SRP Topology Map covers the following areas:

•

•

Viewing the SRP Topology Map

To view the SRP Topology map, proceed as follows:

Step 1

Right click a SRP interface object andchoose Cisco 12000/10720 Manager>Fault>SRP>Topology. See

for information on which objects allow you to launch the SRP Topology Map.