Figure 7-3 – Cisco 12000/10700 V3.1.1 User Manual
Page 185
7-5
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 7 Interface Profiles
Creating an ATM Interface Profile
Figure 7-3
Prompt Window
Step 3
Enter a name for the new profile in the Enter profile name data entry box.
Step 4
Click Ok. The ATM Interface Configuration Profile window reappears with the new profile name
displayed in the ATM Profile list at the left of the window.
Note
Choose the Copy and Copy Page Configuration options in the Edit menu to cut
and paste between different profiles. This is useful when you wish to copy
information from one profile to the next.
Step 5
Configure the parameters displayed in the ATM Configuration and ILMI Configuration areas, as
required.
Note
You can apply an existing profile to a new profile to save time when configuring
new profiles. Choose the Apply Profile option from the Edit menu and then choose
the existing profile you wish to apply from the profiles listed. The configuration
settings are copied from the existing profile to the new profile. The settings copied
appear in blue.
Note
The parameters displayed in the Configuration (2) tab are not applicable to
Cisco 12000/10720 Router Manager.
Step 6
Choose File > Save to save the parameters you have selected for your profile.
Step 7
Choose File > Close to close the window.
Note
You have now created a profile for the ATM Interface. Proceed to the
and Commissioning a Generic Interface” section on page 8-4
for details on
applying the profile and configuring the interface.