Cisco 12000/10700 V3.1.1 - Manual (Page 477)

15-21
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 15 MPLS Management
Fault Management for MPLS LDP
Target Peer Address—The value of the internetwork layer address used for the Extended Discovery.
Optional Parameters—This attribute specifies whether or not the optional parameters for the LDP
Initialization Message is set or not.
Discontinuity Time—The value of sysUpTime on the most recent occasion at which any one or more of
this entity’s counters suffered a discontinuity.
Storage Type—The storage type for the LDP entry.
Entity Statistics Tab
The Entity Statistics tab displays statistics for each LDP entity configured on a router. The Entity
Statistics tab (see
Figure 15-10 ) displays a single Entity Statistics area.
Figure 15-10 MPLS LDP Entity Status Window—Entity Statistics Tab
Entity Statistics
The Entity Statistics area displays a read-only table which expands on the information provided in the
“Entity Tab” section on page 15-19 . The purpose of this table is to display statistical information about
the LDP Entities on the LSR. The table displays the following information:
Local LDP Id—Displays the LDP identifier.
Index—This index is used as a secondary index to uniquely identify this row.
Attempted Sessions—A count of the total attempted sessions for this LDP Entity.
Session Rejected No Hello Errors—A count of the Session Rejected/No Hello Error Notification
Messages sent or received by this LDP Entity.