Vlan synchronization, Table 13-1 – Cisco 12000/10700 V3.1.1 User Manual
Page 368
13-2
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 13 Managing VLANs
VLAN Synchronization
VLAN Synchronization
VLAN synchronization is provided to synchronize the EM with the VLAN information present in the
network. The synchronization process gets the VLAN information from the devices in the network and
all the previous VLAN information is lost. Once the VLAN synchronization is completed, all the VLAN
objects and the sub-interfaces are deployed under a DefaultDomain. See
Note
It is recommended that synchronization should not to be performed at a time when there is heavy load
on the system i.e., when all the chassis are in the performance logging state.
The first time sync is a clean sync which means that the VLAN information from the entire network is
cleaned up and then retrieved.
VLAN synchronization happens only on the chassis which are in the managed state i.e., normal or
performance logging state.
To synchronize the VLAN objects, proceed as follows:
Step 1
Right click on a domain in the VLAN view and choose Cisco 12000/10720 Manager>
Configuration>VLAN Management>Synchronize. The VLAN synchronization dialog can be
launched from the VLAN view or see
for information on which objects allow
you to launch the VLAN Synchronize window.
Table 13-1 Launching the VLAN Windows
Cisco 12000/10720 Router
Manager Window/Task
Objects (that can be selected) to Open the
Window
Menu Options to Select to Open Window
Site
Chassis
12000
Series
Chassis
10720
Module
Interface
VLAN Performance
Yes
Yes
Yes
No
No
Cisco 12000/10720 Manager>Performance>
VLAN Management>Performance
VLAN Configuration
Yes
No
No
No
No
Cisco 12000/10720 Manager>Configuration>
VLAN Management>Configuration
VLAN Synchronization
Yes
No
No
No
No
Cisco 12000/10720 Manager>Configuration>
VLAN Management>Synchronize