Pilz PSENvip RL D P - Manual (Page 90)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-9
7.2 Initial commissioning
7 Commissioning
Fig. 7-7: Adjustment image
Inbetriebnahme_Erstinbetriebnahme_Empfaenger_ausrichten_Justagebild_2
The receiver is correctly aligned with the transmitter when:
 The cross-hairs of both adjustment templates overlap
 The quadrants form a full circle and
 The centre point of the upper tool is on the bending line.
The correct adjustment image on the display will look like the image
shown in the illustration below.
Inbetriebnahme_Erstinbetriebnahme_Empfaenger_ausrichten_Justagebild_nicht_mittig_2
Fig. 7-8: Correct adjustment image
Inbetriebnahme_Erstinbetriebnahme_Empfaenger_ausrichten_2
INFORMATION
The adjustment templates have different cut-outs around the
cross-hair (see section entitled "Adjustment templates"). This
makes it easier to evaluate the adjustment direction required by
the transmitter and receiver.