Pilz PSENvip RL D P - Manual (Page 3)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
1
Contents
Contents
Contents Page
Chapter 1 Introduction
1.1
Validity of documentation 1-2
1.2 Overview of documentation 1-3
1.3 Definition of symbols 1-5
Chapter 2 Overview
2.1
Range 2-3
Chapter 3 Safety
3.1
Intended use 3-1
3.1.1 Approvals 3-1
3.1.2 Safety during operation 3-2
3.1.2.1 Hazards arising from the installation of the
PSENvip 3-2
3.1.2.2 Hazards when the press brake is in creep
speed mode 3-2
3.1.2.3 Hazards arising from a reduced protected
field 3-2
3.1.2.4 Hazards arising from incorrect handling of
the workpiece 3-2
3.1.2.5 Correct handling of the workpiece 3-3
3.1.3 Categories / SIL 3-4
3.1.4 Tool shapes 3-5
3.2 Standards 3-8
3.3 Safety guidelines 3-9
3.3.1 Use of qualified personnel 3-9
3.3.2 EMCD 3-9
3.3.3 Warranty and liability 3-9
3.3.4 Safety during commissioning, installation
and operation 3-10
3.3.5 Disposal 3-10
Chapter 4 Function Description
4.1
Overview 4-1
4.2 Protected field 4-4
4.2.1 Standard press stroke 4-5
4.2.2 Standard interrupted press stroke 4-7
4.3 Overrun 4-9
4.4 Description of the units 4-11
4.4.1 Overview 4-11
4.4.2 Transmitter 4-13
4.4.2.1 Inputs 4-13
4.4.3 Receiver 4-14
4.4.3.1 Inputs 4-14