Part 3, Qrf700 hardware & system installation illustration, Student keypad – QOMO QClick V7 User Manual

Page 88: Specifications, Illustration, 1 student keypad, 1 specifications, 2 illustration

www.qomo.com

Part 3. QRF700 Hardware & System

Installation Illustration

3.1 Student Keypad

3.1.1 Specifications

Dimensions (L× W× H):

4.5’’ x 1.8’’x0.71

’’

Keys: 21

Power required: 2 AAA Batteries

RF transmission distance: ~200 feet

Battery life: Depends upon use or up to 6 months

Function: Transmit response signals

Note:

Each of the clickers is battery operational. Insert two “AAA” batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.

Enclosed in this package are the following items

Screwdriver

Screws

3.1.2 Illustration

3.1.2.1 Student Keypad Layout

17. Power: Turns unit on and off

18. Screen Display

19. Left Soft Key

: Confirms the operation which appears on the bottom left of the screen