QOMO QClick V7 - Manual (Page 65)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 65
6 The quiz is loaded
and ready but the
timer
has not
started. The student
keypad
not
previously used for
this test.
Yes Power
Up No Host Display, need to
login to the class and
register.
7 The quiz is loaded
and ready but the
timer
has not
started.
Yes Enter
and
send the
answer Receives the message
“Wait to Start”
8 The quiz is loaded
and
running, the
timer started. The
student
keypad
joined the class
previously.
Yes Power
Up You can press “Send”
key to directly logon
back to previous class.
The LCD displays the
register screen.
9 The quiz is loaded
and running and the
timer started. Yes Enter
and
send the
answer Displays “Success!”
message.
Note: Before using your student keypad to join a quiz with the pace controlled by the instructor, you
should understand the function operation from using this table.
To join a quiz, follow these steps:
a) Turn on the keypad power. If the scenario is in form 5 or 8, you just need to press the “Send”
key .
b) If you did not join the class previously, you may have to login to the current class and register
for the class.
c) If you joined the current class previously, you may simply press the “Send” key to get a
short cut to directly register for the class.
d) If your keypad ID is not listed in the current class, you may need to set your keypad ID to the
one listed in the class, or try to force a login. The instructor will choose to allow the
participation of a non-registered student.
e) After you registered for the class, follow the instructor’s quiz pace.

Attending a quiz with self-controlled pace
Note: Before using your student keypad to join a quiz in the self-controlled pace, you should
understand the function operation forms on the above table before you can begin your quiz.