Part 5, Qrf300 hardware & system installation illustration, Student keypad – QOMO QClick V7 User Manual

Page 137: Specifications, Illustration, 1 student keypad, 1 specifications, 2 illustration

www.qomo.com

137

Part 5. QRF300 Hardware & System

Installation Illustration

5.1 Student keypad

5.1.1 Specifications

Dimensions (l w h): 104mm x 49mm x15 mm

Buttons on Remote: ③ Rush Quiz, ④ A-F

Power required: 2 AAA Batteries

Transmission distance: ~200 feet

Battery life: > 6 months

Function: Transmit response signals

Each student keypad is labeled with an ID number. The ID number can be set and reset by the
manager. This feature is ver

y important, if one student keypad is lost or damaged, don’t worry, you

can replace a spare remote by just resetting its ID number.

5.1.2 Illustration

Transmission window

Indicator light

Button for “Rush Quiz” activity mode

Choice buttons, labeled “A” to “F”

Note:

Each of the clickers is battery operational. Insert two “AAA” batteries,
into the port on the back of the clicker as indicated on the hardware.
Slide the back plate into place. For a more secure closure, use the
screwdriver to insert the screw. The Screws and screwdriver are
provided for your convenience. Do not over tighten in order to avoid
stripping the screw. When the batteries have expired, remove the
screw and back plate and replace the batteries with fresh ones. Re-
secure the back plate and screw, as necessary.

Enclosed in this package are the following items