Main receiver and usb cable, 3 main receiver and usb cable – QOMO QClick V7 User Manual

Page 139

www.qomo.com

139

13.

“Stop”, it is used to stop gathering the response information from the participants’ remotes.

Note:

Each of the clickers is battery operational. Insert two “AAA” batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.

Enclosed in this package are the following items

Screwdriver

Screws

5.3 Main Receiver and USB Cable

Used to receive signals from the remotes and send information. The main receivers is connected to
computer through USB cable

Specifications

Dimension (l w h): 76mm x 23mm x 10mm

Weight: 26g

Operating Temperature: 0-40 degree

Operating Relative Humidity: 0-90%

Receiving distance: ~200 feet radial

Function: Used to receive signals from the remotes, and send information to the computer.

Illustration

QRF300 Main Receiver