QOMO QClick V7 - Manual (Page 101)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 101
short cut to directly register for the class.
i) If your keypad ID is not listed in the current class, you may need to set your keypad ID to the
one listed in the class, or try to force a login. The instructor will decide the permission of the
participation.
j) After you registered the class, follow the instructor’s quiz pace.

Attending a quiz with self-controlled pace
Note: Before using your student keypad to join a quiz in the self-controlled pace, you should
understand the function operation forms on the above table before you can begin your quiz.
To join the quiz, follow these steps:
1. If you did n’t join the class previously, you may have to login to the current class and then
register and join the class.
2. If you joined the current class previously, simply press the “Send” key to get a short
cut to directly register for the class.
3. If your keypad ID is not listed in the current class, you will need to set your keypad ID to the
one listed in the class, or try to force a login. The instructor will decide the permission of the
participation.
4. You can begin to answer the questions at your own pace, usin g the “Up Key” /“Down
Key ” to scroll up and down to enter and view the answers . Use the “Menu/ok” key
to save your answers into the keypad.
5. After you have finished, press the “Right Soft” key t o select the “Option” menu and
select item “Send Answer” to turn in your answers.
3.2 Instructor Keypad
3.2.1 Specifications
Dimension (L × W × H): 5 “x 2” x 1”
Keys: 21
Power required: 2 AA Batteries
RF transmission distance: ~200 feet
Battery life: 6 months to 1 year depending on use
(Not including laser pointer use and Offsite mode use)
Function: Instructor/Presenter
Note:
Each of the clickers is battery operational. Insert two “AA” batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use