KMC Controls SAE-1162 - Manual (Page 9)

SAE-1111/1112/1162 Carbon Monoxide (CO) Detectors 9 Installation Guide © 2014 KMC Controls, Inc. 717-019-55C
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
[email protected]
Maintenance
Careful installation will also ensure long-term reliabil-
ity and performance. Remove dust as necessary from
holes. Clean with a soft, damp cloth and mild soap.
More Information
For specifications, see
the SAE-1111/1112/1162
Data Sheet on the KMC
web site ( www.kmccon-
trols.com ).
Important Notices
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice. KMC
Controls, Inc. makes no representations or warran-
ties with respect to this document. In no event shall
KMC Controls, Inc. be liable for any damages, direct
or incidental, arising out of or related to the use of
this document.
Accessories
XEE-6111-050 Transformer, 120-to-24 VAC, 50
VA, single-hub
XEE-6112-050 Transformer, 120-to-24 VAC, 50
VA, dual-hub
Models
SAE-1111 Space CO sensor (replaces older
SAE-1101)
SAE-1112 Space CO sensor with two relays
(replaces SAE-1102)
SAE-1162 Duct CO sensor with two relays
(replaces SAE-1151/1152)
WARNING
All commercial CO sensors have a finite life. The
life expectancy of these models is 5 to 7 years. They
must be replaced periodically to ensure reliable
operation in detecting conditions that are potentially
hazardous to human health and safety.