Dell PowerVault 160T LTO2 (Tape Library) - Manual (Page 87)

Specifications: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/specs.htm[5/16/2013 10:08:25 AM]
NOTICE: Connect an 18 gauge stranded copper wire from the control module to earth ground.
The typical power consumption for each module is shown in Table 3 .
Table 3. Typical Module Power Consumption
Module AMP @ 110 V AMP @ 220 V kW BTU/hr
Control
Minimum (1 drive) 3.4 1.7 .375 1280
Maximum (12 drives) 12 6 1.32 4508
Expansion
Minimum (no drives) 0 0 0 0
Maximum (12 drives) 9 4.5 .99 3381
Physical Specifications
This section contains the physical specifications for the library modules comprising the Dell PowerVault 160T Tape Library.
If the library is installed on a raised floor, the raised floor should be stabilized to prevent a horizontal shift of the raised floor
structure. The library has four point loads each on the control and expansion modules. Refer to Table 4 .
Table 4. Physical Specifications
Height Width Depth Maximum Weight Distributed Load Point Load
CAUTION: Control Module
1
77.4 in.
1965.9 mm
24.3 in.
616.7 mm
38.3 in.
973.9 mm
899 lb
408.6 kg
139.1 lb/ft
2
680.4 kg/m
2
73.8 lb/in
2
5.2 kg/cm
2
CAUTION: Expansion Module 2
77.4 in.
1965.9 mm
23.6 in.
599 mm
38.3 in.
973.9 mm
885 lb
402.3 kg
140.9 lb/ft 2
689.6 kg/m 2
72.7 lb/in 2
5.1 kg/cm 2
1
Includes 12 drives, redundant power, and full media.
2
Includes 12 drives, redundant power, and full media.
Configuration One
The first configuration consists of the control module. See Figure 1 . Physical specifications are listed in Table 5 .
Figure 1. Configuration One Diagram