Dell PowerVault 160T LTO2 (Tape Library) - Manual (Page 5)

Introduction: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/intro.htm[5/16/2013 10:08:13 AM]
Library Management
Control of the library originates in the library management module. It manages system hardware and allows external devices
to configure the library and to obtain system status.
Cartridge Accessor
The cartridge accessor moves cartridges between storage cells, tape drives, and the I/E station. A picker is used to get or put
cartridges in a storage cell or a tape drive slot. The picker moves along an X and Y axis and can pivot 180
o . A barcode
scanner on the picker assembly identifies cartridges and storage cells.
Import/Export Station
The I/E station allows you to import and export cartridges without interrupting normal library operation. The I/E station is
located on the front of the control or expansion module. See Figure 1 . Each I/E station has a capacity of 24 LTO cartridges
located in four removable magazines. Capacity varies by drive type.
NOTE: The I/E station cannot be configured as a storage location
Cartridge Magazines
The cartridge magazine is a storage assembly located on the drive or door side of the control or expansion module. The
control module can house a maximum of 264 LTO slots. Capacity varies by drive type. See Figure 3 .