Dell PowerVault 160T LTO2 (Tape Library) - Manual (Page 13)

Getting Started: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/getstart.htm[5/16/2013 10:08:14 AM]
NOTES: It may take a few minutes for the library to fully power on and the Library Management Console to display.
During the power-on sequence, the Robotics Enabled indicator will flash. Once the system is fully up, the Robotics
Enabled indicator will turn solid green. For more information, refer to Indicator Panel.
Logging on Locally
After the system has finished booting, the Logon dialog box is displayed on the touch screen.
1. Touch the text box after the word Name.
2. Use the keyboard to enter the word admin.
3. Touch the box below the Name field.
4. Use the keyboard to enter the word password.
5. Touch OK.
NOTICE: After the initial log on, change the password for the admin account. For procedures, refer to Modifying
User Accounts .
6. Proceed to Running the Setup Wizard .
Running the Setup Wizard
After you have logged on, the display will change to the Library Management Console. For a detailed description of
management interface components, refer to Understanding the User Interface .
Use the Setup Wizard to modify:
Network Configuration
Partitions
Date and Time