Dell PowerVault 160T LTO2 (Tape Library) - Manual (Page 24)

Understanding the User Interface: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/interfac.htm[5/16/2013 10:08:16 AM]
I/E displays a table of the current contents of the I/E station. The information displayed by this button can also be displayed
by selecting Monitor—> I/E Station. For an interpretation of the display, refer to Monitoring I/E Station Status .
Figure 6. Import Toolbar Button
Import launches the import of cartridges, if the current library is a partition. An import can also be requested by selecting
Operations—> Import. For information about this command, refer to Importing Cartridges into Partitions .
Figure 7. Export Toolbar Button
Export launches the export of cartridges, if the current library is a partition. An export can also be requested by selecting
Operations—> Export . For information about this command, refer to Exporting Cartridges from Partitions .
Figure 8. Service Toolbar Button
Service launches the Service Wizard. This wizard can also be launched by selecting Tools—> Service. For information about
this command, refer to Troubleshooting .
Figure 9. Log Off Toolbar Button
Log Off logs off the current user, after confirming the logoff request. Another way you can log off is to select Operations—>
Logoff. For information about this command, refer to Logging off .
Reading the Library Information Panel
The library information panel occupies the central portion of the LMC display. It provides you with a great deal of status
information at a single glance. The following information is dynamically displayed:
Figure 10. Library Information Panel