Dell PowerVault 160T LTO2 (Tape Library) - Manual (Page 17)

Getting Started: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/getstart.htm[5/16/2013 10:08:14 AM]
$IATEMPDIR=/your/free/space/directory
$ export IATEMPDIR -
To set the variable for C shell (csh) and tcsh:
$ setenv IATEMPDIR /your/free/space/directory
5. From the temporary folder, type: chmod 777 , for example,
chmod 777 MC400SOL.bin
6. If the temporary folder is NOT in the user's path, type [space]./, e.g.
./MC400SOL.bin
This launches the installation from the current directory.
If the temporary folder is in the user's path, simply type: (including extension), for example:
MC400SOL.bin
This starts the InstallAnywhere program, which prompts you throughout the installation.
7. When you are prompted to choose an installation set, select Client Only.
Launching a Remote Client
To manage your library remotely, point your client to the IP address of the library.
Use one of the following procedures to start the client, depending on the operating system your client is running:
Launching a Microsoft Windows® Client
1. If you accepted the defaults during the installation, select the SNC Manager program group on the Start menu to see
the client icon. If you chose a program group other than the default, go there instead.
2. Select Client to launch the program.
3. Proceed to Logging on Remotely .
Launching a Red Hat® Linux Client
1. To start the Red Hat® Linux client, start a terminal window and type
Client
and press Enter.
NOTICE: Uppercase C is mandatory.
2. Proceed to Logging on Remotely .
Back to Contents Page