What is a partition, Where can i find the serial number, How many characters can be in the barcodes – Dell PowerVault 160T LTO2 (Tape Library) User Manual
Page 57: What barcode formats are supported, What do i do if i lose my password, What do i do if i lose power during a backup
Frequently Asked Questions: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/faq.htm[5/16/2013 10:08:20 AM]
What is a partition?
A partition is an abstraction of an underlying physical library that will be considered a different personality, capacity, or both
to a host. It is a collection of real physical elements, combined to create a grouping that is different from the physical library,
and is often dedicated to a single host application. Another term for partition is "logical library." For a more detailed
. To learn how to create a partition, go to
Where can I find the serial number?
The serial number is displayed in the second column of the first line output by Monitor—> System. Use the serial number
when
from Dell Support.
How many characters can be in the barcodes?
The library reads barcodes up to 16 characters. For more about barcodes, refer to
.
What barcode formats are supported?
Cartridges must have an external barcode label that is machine-readable to identify the volume serial number. A barcode
must use only uppercase letters A to Z and/or numeric values 0 to 9. The library currently supports Code 39 type barcode
labels. For more about barcodes, refer to
What do I do if I lose my password?
Contact Dell Support for instructions to reset the password. Refer to
What do I do if I lose power during a backup?
Because your system contains redundant power supplies, it is unlikely that power will ever be completely unavailable to the
library. However, the library should recover even if power does go out completely during a backup. If power remains off,
press the Power button and leave it in the off position until a reliable power source is obtained. Once the power to the library
is turned back on, the library will recover. You will need to re-run the backup using your application software.