Incoming – Canon Pixma MP530 User Manual
Page 97
Chapter 7
95
Changing the Machine Settings
Enables/disables Error Correction Mode (ECM) sending.
z
PAUSE TIME
Selects the pause length when you press [Redial/Pause].
z
AUTO REDIAL
Enables/disables automatic redialing.
z
TX START SPEED
Selects the speed at which the machine starts transmitting.
z
COLOR TX
When faxing in color from the ADF, enables/disables automatic converting the image into
black and white before sending if the destination fax device does not support color.
z
TX REPORT
Enables/disables automatic printing of a transmission report after sending.
z
DIAL TONE DETECT
If you selects
may not be supported depending on your country or area.
RX SETTINGS
z
ECM RX
Enables/disables Error Correction Mode (ECM) during reception.
z
FAX/TEL AUTO SW
If you select
z
DRPD:FAX RNG PAT
If you select
setting is only available in US and Canada.
z
INCOMING RING
If you select
mode, enables/disables ringing for fax calls (A telephone must be connected to your
machine for ringing to occur).
REDIAL TIMES:
If you select
number of redialings.
REDIAL INTERVAL:
If you select
length of time between redialings.
ATTACH TX IMAGE:
If you select
of the fax under the report (black & white faxes only).
RING START TIME:
Selects the time the machine takes to check whether a call is a
fax or voice call.
TEL RING TIME:
Selects the ring length for voice calls.
DEFAULT ACTION:
Selects whether the machine switches to receive mode after
the ring time has elapsed, or whether it disconnects the call.
RING COUNT:
If you select
of rings for fax calls.