Canon Pixma MP530 User Manual

Page 23

Text mode
Original mode

Chapter 1

Before Printing

Using the ADF

Remove any documents from the Platen Glass.

Open the Document Tray.

Load the document in the ADF (1).

Load the document with the side you want to copy, fax, or scan face up in the ADF.

Adjust the Document Guides to match the document width (2).

Note

Set a document on the Platen Glass if you want to scan it at optimum quality.

The area (range) within 0.08” / 2 mm from the top edge of document cannot be printed
since the machine cannot scan it.

Do not load the following types of documents in the ADF. They will jam.
– Wrinkled or creased paper
– Curled paper
– Torn paper
– Paper with holes
– Carbon paper or carbon-backed paper
– Surface treated paper
– Onion skin or thin paper
– Photograph or thick paper

(2)

(1)

(A)