Canon Pixma MP530 - Manual (Page 19)

Chapter 1 17 Before Printing
(14) [Tone]
Switches temporarily to tone dialing. Also changes the mode when entering characters.
(15) [OK]
Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error was resolved, or if paper
jams are cleared. Ejects documents remaining in the ADF.
(16) [(-) ] and [ (+)]
Scrolls through menu selections, and increases or decreases the number of copies. For
the fax settings, [
] cancels the entered character, and [ ] enters a space between
characters.
(17) [Back]
Returns to the previous screen.
(18) [Stop/Reset]
Cancels operations. If this button is pressed during printing, the machine aborts printing.
Resets the settings for the number of copies, for the ratio of reduction/enlargement, for
the intensity, and on <1.SPECIAL COPY>.
Also enables you to return to the standby screen after you set some menus.
(19) [Color]
Starts color copying or faxing.
(20) [Black]
Starts black & white copying or faxing.
(21) [Paper]
Sets the page size and media type for copying, and for received faxes.
(22) [Two-Sided]
Selects two-sided copying.
(23) [Image Quality]
Sets the copy resolution and fax resolution.
(24) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
(25) Cassette Lamp
Lights when the Cassette is selected.
(26) Auto Sheet Feeder Lamp
Lights when the Auto Sheet Feeder is selected.